Category: Music

The music journey – Making an album (week 6)

Week 6, quite a different week compared to the last few weeks. My brain wasn’t cooperating and I couldn’t stand sounds. Which makes working with music pretty difficult. It’s part of having brain damage so I had to make due. And try keeping busy in other ways.

First part of the week was mostly getting some extra rest in, and after that period I mostly been trying to read manuals. Albeit slow I stil got the feeling I was working on the project. And in a way this was the case.

Hopefully I have recovered enough into next week and I can start working on my music project according to plan.

The music journey – Making an album (week 5)

This week was a week of adapting to my possibilities, after being away for a little while most of the week was comprised of rest & recovery. Late Wednesday afternoon was the first moment in the week the energy levels were sufficient enough for my music activity.

So I got off course a bit.

Planning

My original planning consisted of the following:

      • Ableton Live & Samples.
      • Freeform patching with my Eurorack.
      • Reading manuals.
      • A coaching session.

Execution

My week started on Wednesday afternoon, just started working on a patch and pressed record. Without taking any notes and wondering about how to reproduce the results later on. Just recording some variations.

Practiced a little in taking samples out of the recordings and processing them. Not done a huge amount of work, but that’s all part of it. The good thing is I did some work and kept the consistency. Which gives a solid base and will yield results later on.

Got together with my coach for a session and the end of the week and got some new assignments in going around the fatigue which makes working with actual sound strenuous for me. Brain damage sets the pace in my case. Things I would never come up with, this alone makes having a coach worthwhile, on to next week.

The music journey – Making an album (week 4)

Another week done, this week I realized that my initial goal of making an album might be reaching too far for the timeframe I have at the moment. Especially given the learning curve I still have. Now I have the idea to take on a smaller project as an intermediate step.

This is one of the biggest benefits of having my coach as sparring partner, talking about ideas to keep the momentum and keep the process goals intact. Without getting distracted too much in pursuit of the bigger end goal. So this week I have invested time in learning Ableton and coming up with an idea for the smaller project.

The planning

planning was as follows :

      • Ableton Live & Samples.
      • Working on a standard patch.
      • Sketching the idea for the smaller project.
      • A coaching session.

Execution

First part of the week was working of the overflow of activities from the previous week. The standard patch is thought out and written down. I’m almost there on a method to write patch ideas down pretty fast and being able to perform them later.

Most of my time was spent on learning how to work with samples in Ableton.
I took my time on that so that cut into my music making hours. Just to get some extra milage on the learning objectives.

I have also come up with a few notes on how to put together a smaller in between project. To set me up for a good effort in going trough the whole process going from idea to finished project. Without it having to be a complete album.

Fun event this week was meeting up with my coach and another student at an event for a workshop and small live performance by my coach. We had some fun and interesting conversations as well. Thanks for the fun people ! It’s always fun to get out and meet people.

The music journey – Making an album (week 3)

The past week I have focussed on going through the whole proces. My planning consisted of the following parts.

      • Building a patch on my Eurorack synth.
      • Programming sequences for that patch.
      • Recording it.
      • Making samples out of the recording.
      • Making a composition with the sample pack
      • Finishing the track.

As a study and research subject I took scales, tonality and musical notes.

Execution

My planning was pretty clear, now onto what really happend. The patch I partially finished and I started doubting my choices surrounding the layout of modules in my cases. So back to the drawing board and trying to downsize a bit for this project. In order not to get lost and keep patching. Less is more.

After this rebuild I have recorded a small drone and got on with it. I was way out of my planning as a result. So for next week my planning remains roughly the same. Learned a lot though and had a reaffirmation that my framework is solid.

It’s just not that straightforward , it will remain a search to what works and what doesn’t.

And given the limited time I get to spend on this project every planning I don’t meet automatically means a delay. Just as it was the case last week. But that in itself isn’t a real problem. The end result will still be there.

I will keep making (and adjusting) my planning and try sticking with it. It gives a very nice structure to the whole proces , and it has a build in continuity , ever since I started working this way I have been at it every week for that set amount of time. Which in itself is very important.

The music journey – Making an album (week 2)

Week 2 in the house, time flies when you’re having fun. And fun it is. Week 1 resulted in my project framework for what I want to achieve. For this week my goal was to start building my sample library for my tracks.

Firstly, I want to talk about time management. I don’t have a lot of quality time due to my brain damage , so I can’t be at it for hours on end or listen to a lot of sound for a long period of time. So my schedule is an hour of intense activity at a time.

Which means making actual sounds for sampling , listening to loops etc. Working with sound basically. Learning and reading is easier on my brain so I can do that more often. So it’s preparation , and then making the noise.

Things like building my Max MSP patches, Eurorack ideas and learning both Max MSP and Ableton are at the forefront at the moment. And about 2 hours of sound design and sampling.

Another thing I got to do, is make a moodboard of my influences for the album. Which is fun to do, it has also brought some new angles to the project in ways of getting it all together.

One thing I have noticed is that it’s way more fun to have a goal. I enjoy simply sitting with my gear and making sounds, this really gives it an edge. Being not solely a tool to escape but to really create is something I have never done.

Not all the planned stuff got finished this week, and maybe my initial goal is something I need more time to accomplice , but for now I just keep at it.

Max MSP project – Looper design

It’s been awhile updating my looper project, mostly because I have been busy learning MAX.

The looper project has reached the design stage. Building the looper by following the YouTube video’s by dearjohnread is done and now I have a functioning looper patch.

Now it’s time to start designing my own looper. In my Eurorack system I have an Expert-Sleepers ES-9 with a few audio inputs. 16 to be exact, now keeping track of 16 loops is a bit much whether it is in a live set or a jamming session. The start will be 4 tracks, inspired by the old 4 track recorders. I can always expand later.

The 4 tracks need to controllable by a midi controller, these functions must be available:

    • Start and stop recordings
    • Start and stop  playing the recorded loops
    • Mute and unmute of the loops

This will be the basic controller wise. Besides the loops I have several ideas for applying effects , like stutter, reverb distortion and whatever else comes to mind.

Functions need to be :

    • Effects per loop channel
    • Add & Delete
    • Turn on & Off
    • Building effect chains per channel

These functions also need to be controllable via a midi controller. I own an old Push 1 , which should be enough. I will start with that and make it customizable later on.

This is the basic concept for the design, I will post the more expanded design notes on my GitHub. Here I will go into the whole learning process.

The music journey – Making an album (week 1)

Starting a new project , making an album. And as with many bigger goals in my life in the last few years , I got some expert help guiding me along the way. The idea behind this is I can get up to speed a bit faster and avoid some common pitfalls along the way.

It’s also a shift from making music pure as a hobby to something more serious. Going after a goal I have had in the back of my mind for ages. Whether I have the guts of actually releasing it remains a question. But that’s the idea.

I will try and write a weekly update on the process , for the first week it’s mainly about writing the concept of the album down on paper and making a rough planning. That alone gives me a focus and energy in going forward.

Max MSP project – The idea , a looper

In order to learn Max/MSP and give the proces more focus , I have opted for a simple idea. Making a Looper. Think the hardware loopers like the Boss RC-505 and more on the experimental side, the Soma Cosmos.

It’s a looper aimed at live use and jam sessions, with the Eurorack as the input. The sound source.

The Looper needs to take care of recording loops from the modular. In order to have more control about the end result and what you heard in a live set. Adding loops , editing then and adding effects to it.

The interface between the Eurorack and the computer is an Expert Sleepers ES-9. Which is an audio interface for Eurorack. It has 8 audio inputs. So the looper will be one with 8 channels. The looper will be a buffer between the Eurorack and the music coming out of the speakers.

I am starting with a basic patch and will expand on it as I learn more. I will divide the project into little steps so I can keep control. And don’t get list and get finished results.

I have found a number of YouTube video’s on making a looper, first order of business will be simply building these. And later on changing them and building the functionality I want in them. And then I will release the first version.

The first version will be the basis for all future additions and built out on this.

video list :

Dearjohnreed – Four track looper part one
Dearjohnreed – Four track looper part two
Dearjohnreed – Four track looper part three

Soria box – Loop pedal from Scratch

I will share it on my Github when I have my first version. This can be found here :

Cornerman – Github Max/MSP

 

Max MSP project – Start learning , some resources

The new project has started. So first off , I started my search for good learning materials. Books, video’s the lot.

The phenomenal help within Max/MSP is the starting point obviously , because it’s really good. Once you know what you are looking for. It’s a bit like learning a language first you need to know the words.

Books

To counter my lack of knowledge on the language and what to look for, I needed additional sources. As a lot of my time is spent away from computers, I always start out with books. I already had bought two very good books on Max on my bookshelf. Ones that would look great in anyone’s musical book collection. Especially if you are into making music and the theory behind all of it.

Electronic Music and Sound Design series

These books by Alessandro Cipriani & Maurizio Giri are very good and go indepth on everything regarding Electronic music and Sound design. The fiets chapters being the theory behind waveforms and how sounds work towards more max oriented chapters on how to build your own tools for building synths and other musical systems.  As far as I know there are 2 parts available with parts 3 and 4 on the way.

The first 2 are also adapted for the latest max version, 8. If you can get an older version it’s fine too. The additions for the new version to the books can be found online for free.

Just started with part one again and although pretty steep in the theory part of things , after some dedicated studying you will get a lot out of these books for sure. I don’t think there is a more comprehensive set of books on music theory, sound design in combination with Max/ MSP.

Step by step : Adventures in sequencing with Max/ MSP

A book dedicated to building sequencers in Max/ MSP. Bought it last year and haven’t started reading yet. Given the importance of sequencers in electronic music and the immense possibilities surrounding them this is a very nice book to have in the collection.

While browsing and reading the introduction it’s emphasized you have some basic Max skills. This book will be on top of the reading list when I will go and built my own sequencers.

YouTube

Loads of really good tutorials can be found on Youtube , some just single video’s on certain topics, but also a few very good channels with loads of material. An overview of channels I found so far:

    • Nedrush : Loads of Max tutorilas and other video’s on Ableton live , the Elektron Octratrack and many, many more.
    • Must1002 : Max video’s , from beginners stuff to more complex, topics nicely cut into small video’s so you won’t be overloaded with long tutorials and can do tiny bits.
    • Dude837 : Wealth of video’s , loads of interesting topics.
    • BazTutorials : Found during my looper research, loads of neatly done video’s per topic.
    • dearjohnreed : Again mountains of content.

Probably missed a lot of channels and cool material. So let me know about cool stuff.

Misc.

There is also lots of ,material available in the PDF format, from research papers , tutorials and general Max oriented content. Which can be found with university library search engines and on the internet in general. I will post some links in the future whenever I use them in my projects. Also GitHub is a nice source. As well as the Cycling74 website which has lists of stuff.

 

Max MSP project – Open source and the learning curve.

For ages I have MAX/MSP by Cycling 74 installed om my machine and from time to time I am completely obsessed with the endless possibilities which exists in this space. For the ones not familiar with Max, it’s a developing tool for creating anything relating to producing music and integrating visuals. From synthesizers to art installation stuff. And everything in between.

And that’s exactly where my problem manifests itself, it’s just too much. However small I begin, I always get lost. Lost in my own brain to be more exact. And then I stop with pursuing and learning. I have not been able to let it go or start in a direction to try and really push it.

So the idea behind this series is to get more grip on my own learning proces and share everything I learn. I will post it on this blog and I will put stuff in a , yet to put up, GitHub page.

The ultimate goal is to build an interactive looper for live use. A looper which takes the input from my Eurorack synthesizer and takes that input and loops it. Which I can then further manipulate. I will share all my progress (or lack of) , and will share all my notes, first designs and the road when building the patch itself. And ultimately also the music that comes out of the proces.

That’s the main goal , every time I test the patch a series of recordings emerge. I will not share all of them, just the ones at the end of each stage. And that I think are worthwhile sharing.

This might result is a nice collection of useful notes on my own personal learning method, a nice max patch and enough music to compile an album with.

A big project indeed, but by working this way I hope to get into a rhythm and work on it more consistent. On all of it, learning, music and sharing.